Features:
- Multi-functional All-in-One device (AC-DC Charger + DC-AC Inverter for Load + AC Bypass for Load)
- Built-in AC-DC high power charger up to 4520W
- DC-AC pure sine wave output (THD<3%)
- Instantaneous peak power of up to 10KW for AC output
- Up to 6 units of AC output can be paralleled, expanding wattage up to 30KW (5+1 units)
- Utilizes 3 NTN-5K unidirectional AC outputs, configurable for 3Ø4W usage
- -30～+70℃ ultra-wide temperature range, suitable for global deployment or installation in enclosed environments
- Built-in remote ON/OFF control
- Protections:
- DC input: Reverse Polarity, Low Voltage Warning and Shutdown, Over Voltage, Battery Over Discharge
- AC output: Short Circuit, Overload, Over Temperature
- Built-in Modbus or CAN bus communication monitoring
- Optional intelligent controllers available for purchase:
- CMU2E (Stand-Alone Vertical Mounting / Rail Mounting) or CMU2E-R (Rack System Installation)
- Dimensions (length x width x height): 460 x 211 x 83.5mm
- PCB coating for basic moisture / dust / dirt protection
- Certifications: CB / TUV / RCM / EAC / CE / UKCA / FCC
- Compatible with lead acid or lithium batteries
- 5 years warranty
General Specification
DC input voltage range
(19 - 33Vdc) (38 - 66Vdc) (280 - 430Vdc)
AC output frequency
Default setting set at 50±0.1Hz
50/60Hz selectable by DIP S.W
LOW & HIGH
ALARM, SHUTDOWN, RESTART
Reverse Polarity
No damage, re-power on to recover after fault condition is removed
Over Temperature
Shut down o/p voltage, recovers automatically after temperature goes down
Output Short
Shut down the o/p voltage, and re-power it to recover
OVERLOAD (Typ.)
105 ~ 115% load for 180 sec., 115% ~ 140% load for 10 sec.
105 - 115% load for 180 sec., 115% - 150% load for 10 sec.
Protection type: Shut down o/p voltage, re-power on to recover
Remote Control
Power ON-OFF remote control by front panel dry contact connector(by RELAY), Open : Remote off ; Short: Normal work
Communication
MODBus-RTU (RS-485) / CANBus
Withstand voltage
(DC I/P - AC:3.0KVAC) (AC - FG:1.5KVAC)
Working temperature
-30 ~ +70℃(Refer to “Derating curve”)
Safety standards
CB IEC62368-1, CSA C22.2 No. 62368-1, TUV BS EN/EN62368-1, AS/NZS 62368.1, EAC TP TC 004 approved
Dimension (LxWxH)
460x211x83.5mm
